Ecler DPM3003 Notice D'emploi page 12

 STORE sends the currently edited preset to the DPM3003 hardware (to become the
automatically active preset in the hardware). This is only available if .amiclab-m3 is connected
with the hardware. During the store process, a progress dialog box is displayed to provide
feedback of the operation progress.
 PASSWORD opens a dialog box allowing to change DPM3003 hardware access password. This
is only available if .amiclab-m3 is connected with the hardware.
You can choose a blank (no character) password if you don't want the program to open this
password dialog box when the hardware is connected.
 FIRMWARE is used to update DPM3003 firmware (internal code). An BET ACOUSTICS supplied
file with "fw" extension is used to update firmware (visit our web site to download the last
version). Executing this command opens a Windows® typical file selection dialog box.
This is only available if .amiclab-m3 is not connected with the hardware ("CONNECT" button
deactivated).
If the hardware is password protected, a password dialog box opens to type the password and
validate the operation.
12