Functional Description; Intended Use; Product Features; Noise/Vibration Information - Bosch PSB 500 RE Notice Originale

Masquer les pouces Voir aussi pour PSB 500 RE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
OBJ_BUCH-862-004.book Page 17 Thursday, September 24, 2009 7:41 AM
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling
in wood, metal and plastic. Machines with elec-
tronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Depth stop*
2 Front sleeve
3 Rear sleeve
4 Keyless chuck
5 Button for depth stop adjustment *
6 "Drilling/Impact Drilling" selector switch
7 Lock-on button for On/Off switch
Bosch Power Tools
8 Rotational direction switch
9 On/Off switch
10 Auxiliary handle*
11 Wing bolt for adjustment of auxiliary handle *
12 Extraction device with dust collector *
13 Dust collector*
14 Level indicator of the dust collector
15 Release button for dust collector *
16 Filter element (micro filtersystem) *
17 Rubber gasket for dust collector *
18 Dust protection ring*
19 Release button for extraction device *
20 Clamp for extraction device *
21 Locking latch for dust collector*
22 Universal bit holder*
23 Screwdriver bit*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Noise/Vibration Information

Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 97 dB(A);
Sound power level 108 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a
=4.0 m/s
, Uncertainty K =1.5 m/s
h
Impact drilling into concrete: Vibration emission
2
value a
=33.0 m/s
, Uncertainty K =3.5 m/s
h
Screwdriving without impact: Vibration emis-
2
sion value a
<2.5 m/s
, Uncertainty K =1.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
2 609 003 375 | (24.9.09)
English | 17
2
,
2
,
2
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Psb 500 ra

Table des Matières