Battery Installation - Beta 599DGT-A/10 Mode D'emploi

SPECIFICATIONS
Model
N°.
599 DGT-A/10
Accuracy
Operation Mode
Unit Selection
Head Type
Gear Teeth
Buttons
Bright LED
Battery
Battery Life (Continuous Operation)
Battery Life (Standby)
Operating Temperature
Storage Temperature
Humidity

BATTERY INSTALLATION

– Remove the battery cover.
– Insert two R6/AA batteries matching the -/+ polarities of the battery to the battery compartment.
– Put on the battery cover and rotate it tightly according to the following figures.
POWER ON AND RESETTINGWRENCH
– Press to power on the digital torque wrench.
– In the "torque" mode, the screen will display a preset value.
– In the "angle" mode, the screen will display first a "zero" value, and then a preset angle value.
14
Operation
Range
(N-m)
20-100
Beta 599 DGT-A/10
Square
Drive Setting
(inches) Range
1/2" 10/100
CW: ±2% CCW: ±2%
Peak Hold / Track
N-m, ft-lb, in-lb, kg-cm
Reversible ratchet
72
5
12 LEDs / 4 red + 8 green
AA (R6) x 2
~ 110 hours
~ 1 year
-10°C / 60°C
-20°C / 70°C
Up to 90% non-condensingone
+
Alarm Lenght
(mm)
(N-m)
" ° "
_
Battery and cover
413