Advice On Disposal - Bosch B25L Notice D'utilisation

Problem
The iron begins to
• During first use: Certain components on the
smoke when switched
appliance have been lightly greased at the
on.
factory and may produce a little smoke when
initially heated.
• During later use: the soleplate may be soiled.
Water flows through
• The steam function is being used before it
the holes on the sole
has reached temperature.
plate.
• The water is condensing inside the pipes
because steam is being used for the first time
or has not been used for a long time.
Dirt comes out
• There is a build-up of scale or minerals in the
through the sole
steam tank.
plate.
• Chemical products or additives have been
used.
The iron does not
• The boiler is not switched on or the water
produce any steam.
tank is empty.
• The water t ank is not fitted onto the housing
correctly.
• The steam regulator is set to the minimum
position.
The ironed gar ment
• The selected temperature is too high and
turns dark and/or sti-
has damaged the garment.
cks to the soleplate.
The soleplate turns
• This is a regular consequence of usage.
brown.
The iron does not stop
• "Intelligent steam" function activated.
steaming after placing it
on the pad.
The appliance makes
• Water is being pumped into the steam tank.
a pumping sound.
• The sound will not stop.

Advice on disposal

Our goods come in optimised packaging. This basically
consists in using non-contaminating materials which
should be handed over to the local waste disposal service
as secondary raw materials. Your local town council can
give you information about how to dispose of obsolete
appliances.
You can download this manual from the local homepages of Bosch.
Possible causes
appliances as applicable throughout the EU.
Solution
• This is completely normal and will stop after
a short while.
• Clean the soleplate according to the cleaning
instructions in this manual.
• Reduce the steam flow when ironing at low
temperatures (Variable steam control (3)).
• Point the iron away from the ironing area
and press the steam release button (15) until
steam is produced.
• Use tap water mixed 50% with distilled or
demineralised water. If the tap water in
your district is very hard, mix tap water with
distilled water 1:2.
• Clean the sole plate with a damp cloth.
• Never add products to the boiler water.
• Set the main power button (6) to the "I"
position and/or fill the water tank.
• Fit the water tank back onto the housing
correctly (you will hear a click).
• Increase the steam flow by turning the steam
control (3).
• Select a suitable temperature for the material
being and clean the sole plate with a damp
cloth.
• Clean the soleplate regularly with a damp
cloth.
• Just press the trigger once again and the
iron will stop steaming at once.
• This is normal.
• If the sound will not stop, do not use the
steam generator and contact an authorised
technical service centre.
This appliance is labelled in accordance
with European Directive 2002/96/EG con-
cerning used electrical and electronic ap-
pliances (waste electrical and electronic
equipment - WEEE).
The guideline determines the framework
for the return and recycling of used
en
15