Miele STB 201 Mode D'emploi page 11

In all other situations the air inlet valve
should be closed, to benefit from the
full suction power.
 Close the air inlet valve (right hand il‐
lustration).
Maintenance

Always disconnect the vacuum
cleaner from the electrical supply for
cleaning and maintenance work on
the Turbobrush. Switch off at the
wall socket and remove the plug.
Removing threads and hairs
(dia. 04 - 06)
 Cut any threads or hairs that have
become entangled on the roller brush
with a pair of scissors (dia. 04).
Then run the vacuum cleaner to vac‐
uum up the bits.
For more obstinate tangles or block‐
ages inside the Turbobrush, the cover
can be opened. Any large particles can
then be easily removed.
 Using a coin undo the roller cover on
both sides and then remove the co‐
ver (dia. 05).
 Remove any dirt in the brush com‐
partment interior and from the roller
brush.
 Replace the cover and secure it (dia.
06).
en
11