Publicité
Les langues disponibles
Les langues disponibles
Function specification
1-
Insert the plug, put the safety key into the control panel, open the power switch,
full screen display 1 second after the beep sound to enter standby mode manually ini-
tially: SPEED display 0.0: TIME display 0:0.00; CAL display 0; PULSE display 000
2-
In the manual standby mode: press the MODE key, which can be selected by de-
fault preset time or preset distance or calories. If choice shun timing display flash dis-
play; if choice countdown displays the static status.
A: According to the time running the original time is 30:00 you can adjust the time from
5:00-99:00, and the time is countdown until °; distance and calorie is shun timing.
B: According to the distance running, the original distance is 1.00, you can adjust the
speed from 0.50-1.00-1 .50-99.5. Each additional distance is 0.5KM. Dist is countdown
until 0
C: According to the calorie running, the original is 50, you can adjust the speed +/speed
– from 10-15-20-995 (each is 5), calorie is countdown, time and distance is shun timing.
D: If running by manual standby, time, distance and calorie is shun timing. And the ma-
chine will not stop.
3-
In the standby mode, click the program ket, its P1-P12 auto program for choice
4-
In the standby mode, the time will be shown by countdown, original time is
30:00, you can adjust the time from 5:00-99-00 by speed +/- key
5-
In the standby mode, all of fast (speed/slope) is useless. If click the stop key, all
will come back to manual standby status.
6-
When running all mode, it must be have 5 seconds count down (speed display),
and buzzer 5 seconds
7-
In the running mode, mode key and program key is invalid, you can adjust the
speed (2km, 4km, 6km, 8km, 10km, 12km) by fast speed key on the control panel. You
also can adjust the slope from 0-15 by slope key. 0 means the lowest slope. When turn
on/off the machine, the slope is 0.
13
Publicité
