Publicité
Les langues disponibles
Les langues disponibles
1: raised up the parts of the stand pipe and
electronic watch
2: with two M8*60 screw through
connection hole then screw with M8 nuts
3: lift up the armrest of electronic watch
and use two M8*50 screw through armrest
hole to the stand pipe, then screwed tightly
(don't press the signal lines). Then cover the
armrest guards in the armrest.
4: fixed the "U" pipe with two M6*25
screwed tightly
5: put massage fixtures aligned holes, top
with a locking screw M10x70 hexagon,
following with a socket head cap screws
locking M10x80
6: plug massage head power line and
treadmill power line well, and turn on the
power switch, put the safety switch on the
corresponding position, then you can use
the machine (please read the instructions
carefully before using).
11
Publicité
