Weidmüller VT LCL Mode D'emploi page 10

• Check for cable breaks (VT LCL)
• Phase detection on sockets (VT LCL)
• Voltage test through red LED and
buzzer (VT LCL)
• Manual range selection: 12...50 V
and 50...1000 V (VT LCL)
• Use of advanced digital filter technol-
ogy for reliable indication
• Contactless magnetic field testing
(VT M)
• Magnetic field indication through red
(VT M) LED
• Auto Power off
• Torch light pointing on DUT
• IP65 (IEC 60529)
After unpacking, check that the in-
strument is undamaged. The product
package comprises:
1 pc Tester VT LCL or VT M
2 pcs batteries 1.5 V, IEC LR03
1 pc operating instructions
2. Safety Measures
3. Danger of electric shock and
other dangers
10
The testers
constructed
accordance with the safety reg-
ulations for voltage testers and
have left the factory in a safe
and perfect condition.
The operating instructions con-
tain information and References
required for safe operation and
use of the tester. Before using
the tester, read the operating
instructions carefully and follow
them in all respects.
Verification of live-circuit shouldn't
be dependent on testing with a
contactless tester but only on the
voltage test with a 2 pole voltage
tester according to EN 61243-3.
The signal during voltage test
has no information on type and
strength of voltage
To avoid an electric shock, ob-
serve the precautions when work-
ing with voltages exceeding 120 V
(60 V) DC or 50 V (25 V) eff AC. In
accordance with DIN VDE these
values represent the threshold
contact voltages (values in brack-
ets refer to limited ranges, e.g. in
agricultural areas).
have
and tested
been
in