Monster Power PowerCenter HTS5100 MKII Guide De L'utilisateur page 12

HTS 5100 MKII POWERCENTER FEATURES
1. "Clean Power On" Indicator: Indicates Monster Clean Power circuitry is functioning properly.
2. "Unswitched On" Indicator: Indicates power is being supplied to the unswitched outlets.
3. "Switched On" Indicator: Indicates power is being supplied to the switched outlets.
4. "Timed On" Indicator: Indicates power is being supplied to outlets with the sequential turn-on feature.
5. "Protection On" Indicator: Indicates Monster surge protection circuitry is functioning properly.
6. "Ground OK" Indicator: Indicates the PowerCenter is plugged into a properly grounded 120V AC outlet.
7. "Wiring OK" Indicator: Indicates the line and neutral wires at the wall outlet are wired properly.
If the indicator is not lit, consult your local power company or a qualified electrician.
8. "Abnormal Voltage" Indicator: Indicates that the incoming voltage is below approximately 90V AC
or above approximately 125V AC.
9. Digital Input Voltage and Current Usage Meter: Indicates input voltage and amperage draw.
10. Dimmer Knob: Adjusts the brightness of the Digital Input Voltage and Current Usage Meter.
11. "Remote On/Off" Button: Allows the PowerCenter to operate in REMOTE ON or REMOTE OFF modes.
In REMOTE ON mode, outlets programmed as "SWITCHED ON" or "SWITCHED ON AFTER DELAY"
are turned on or off via the Remote "DC Out" on another component such as an AV receiver.
12. "Sequential Power On" Button: Turns on and off outlets programmed as "SWITCHED ON"
or "SWITCHED ON AFTER DELAY."
7