Webasto Hollandia 700 Notice D'utilisation page 7

USER MANUAL
Dear Madam, Sir,
Webasto Thermo & Comfort SE wishes you a lot of pleasure when driving
with your newly installed Hollandia 700 Series sunroof. Your sunroof is a
new generation quality product from. This new generation sunroof will be
available in 2 grades, ENTRY and COMFORT.
Below you will find all you need to know about this Hollandia 700 Series
tilting and sliding sunroof. In order to obtain the maximum enjoyment
from the sunroof, please read these instructions carefully. Wishing you
happy motoring.
SWITCH
The sunroof can be operated by a 3 button switch with self explanantory
symbols. You can either tilt, slide or close the glass panel.
The switch for an ENTRY sunroof is solid black. The COMFORT switch is
available in 3 colours (black, beige and grey), has LED illumination and a
metal coloured edge.
OPERATION
Ensure that your vehicle ignition is switched ON.
SLIDE OPEN (Entry version and Comfort version)
By continuously pressing the button
move in the OPEN direction (fig. A1). The movement of the panel
continues as long as the button is pressed. The panel stops when the
button is released (fig. A2) or the FULL SLIDE OPEN position is
reached.
ONE TOUCH SLIDE OPEN (Comfort version only)
By pressing the button
panel will move automatically towards the FULL SLIDE OPEN position
(fig. A3). The panel stops when any of the buttons are pressed
(fig. A4) or when the FULL SLIDE OPEN position is reached.
the glass panel will
briefly (max. 0.3 seconds) the glass
TILT (Entry version only)
By continuously pressing the button
move in the TILT direction (fig. B1). The movement of the panel
continues as long as the button is pressed. The panel stops when the
button is released (fig. B2) or the FULL TILT position is reached.
ONE TOUCH TILT (Comfort version only)
By pressing the button briefly (max. 0.3 seconds) the glass
panel will move automatically towards FULL TILT position (fig. B3).
The panel stops when any of the buttons are pressed or when the
FULL TILT position is reached.
4 STEPS TILT (Comfort version only)
By continuously pressing the button
move in the TILT direction in 4 steps (fig. B4). The 4 step function
allows the user to find the most comfortable tilt position easily. The
movement of the panel continues as long as the button is pressed.
The panel stops when the button is released or the FULL TILT position
is reached.
CLOSE (Entry and Comfort version)
By continuously pressing the button
move towards CLOSE position (fig. C1 and C2). The movement of the
panel continues as long as the button is pressed. The panel stops
when the button is released (fig. C3) or the FULL CLOSE position is
reached.
ONE TOUCH CLOSE (Comfort version only)
By pressing the button briefly (max. 0.3 seconds) the glass
panel will move automatically towards the FULL CLOSE position
(fig. C4 and C5).
The panel stops when any of the buttons are pressed or when the
FULL CLOSE position is reached.
the glass panel will
the glass panel will
the glass panel will
7