BREIL CHRONO YM92 Mode D'emploi page 10

1. put out the crown to the second click when the small second hand is at the 12 0'clock
position. If the chronograph is measuring or stopped, it is automatically reset to 0
2. Turn the crown to set the hour and minute hands. It is recommended that the hands
be set to the time a few minutes ahead of the current time, taking into consideration
the time required to adjust the chronograph hand position if necessary.
Note: • When setting the hour hand, be sure to check that AM/PM is correctly set. The
watch is so designed that the date changes once in 24 hour.
• When setting the minute hand, first advance it 4 to 5 minutes ahead of the
desired time and than turn it back to the exact.
[If the chronograph hands are not in the "0" position, follow the procedure below
to set them to the 0 position]
Chronograph
second hand
Chronograph
hour hand
6
Chronograph 1/20
second hand
chronograph
minute hand