Personal Protective Equipment (Ppe) - Bohle Veribor BO 600.0 Instructions D'installation

Suction lifters must not be subjected to
¡ ¡
extreme cold (e.g. frost). Temperatures
consistently below 0°C must be avoided at
all costs.
We strongly recommend observing the
¡ ¡
respective national Manual Handling
Operations Regulations. These regulations do
not only recommend the maximum weights
to be lifted but also the load duration (or
frequency), the adopted body posture and the
conditions under which load handling takes
place.
Check before lifting whether you are hysically
¡ ¡
capable of lifting the load under the given
circumstances.
Alterations, additions and modifications of
¡ ¡
the suction lifter are not permissible. This
applies in particular to the safety devices.
Unauthorised alterations or modifications
will void the supplied EC Declaration of
Conformity.
The use of the suction lifter in environments
¡ ¡
subject to explosion hazards (ATEX) is
prohibited.
Operating the device under the influence of
¡ ¡
medications which affect perception and
reactions, or under the influence of drugs and
alcohol is forbidden!
Never try to lift cracked or chipped glass.
¡ ¡
The operator must be able to view the
¡ ¡
vacuum indicator (if mounted) at all times, in
order to assess whether the existing vacuum
is still sufficient.
Personal Protective
08
Equipment (PPE)
NOTE
Personal protective equipment must be worn for
all work with the suction lifter to minimise health
risks.
WARNING
Different health risks exist when working
with the suction lifter, such as injuries
caused by crushing, entrapment or falling
objects!
Wear safety shoes.
Wear robust protective gloves.
Wear close-fitting, tear-resistant work
clothing.
EN
21