Setting The Date And Time - Sony Telephone IT-ID 70 Mode D'emploi

Step 4

Setting the date and time

If you have subscribed to the Caller ID service, the date and time are
automatically set when you received a call.
If you want to set the date and time manually, do as described below.
Example: to set July 4, 4:03 PM (16:03)
4
Press (PGM).
You hear a confirmation beep, and the
clock starts operating.
Notes
• To enter a month from January to September, press (0) followed by the
number of the month (1) to (9), even though the display does not show "0."
• The time is renewed each time the phone receives the Caller ID. Since the
Caller ID sends time information by the unit of one minute, the time
indication may be one minute behind at most.
• When the batteries are expired or are removed for more than one minute, the
date and time setting will be erased.
1
Press (PGM).
2
Press (#).
"CLOCK DATA SET" appears
on the display.
3
Enter the date and time using
the dialing keys.
To enter one digit number, press
the number following "0."
Example:
(0)(7)(0)(4)(1)(6)(0)(3)
07041603
NEW 0 OLD 0
EN
9
Getting Started