Sony Telephone IT-ID 70 Mode D'emploi page 7

To tilt the phone
If you want to tilt the phone, attach the supplied wall bracket on the
bottom of the telephone.
3
2
Wall bracket
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is
Tone
Pulse
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
1
1
pads
2
3
groove
DIAL MODE switch
Set the switch to
T
P
Put the four pads into the
hollows of the wall bracket.
Attach the wall bracket to the
telephone.
Connect the telephone line cord
to LINE jack and attach the
telephone line cord in the
groove of the wall bracket.
EN
7
Getting Started