Ph Probe Calibration - Pool Technologie Autosalt Manuel Utilisateur

6
FILTRATION TIME
For the Poolsquad® Model
7
PH REGULATION INSTRUCTION
REGUL. PH REGUL. PH
OK OK
◄► ◄►
8

PH PROBE CALIBRATION

9
PH CORRECTIVE MODE (ACID OR BASIC)
REGUL. PH REGUL. PH
OK OK
◄► ◄►
Important :
For the protection and longevity of equipments of your pool, it is imperative to respect literally the instructions of use
mentioned in this manual. The presence of an amperometric chlorine regulation, of a redox production controller or a pH
regulation do not exempt from the strict respect of the instructions and do not have authority to eliminate the risks and
damages but only to limit them. Indeed, in spite of the smooth running of a control or regulation device, other factors may
cause damage, in particular :
an insufficient ventilation in case of covered pool (shelter, tarpaulin, cover)
a maintenance default of analysis probes (calibration, addition of the consumable...)
manual processing of supplements excessive or not adapted (choc processing...)
the non compliance with the instructions of use described in the present user manual
These isolated or organized factors will tend to cause oxidation on all metallic parts and of automatic cover pins and
slats, telescopic shelters and heat exchangers can lead to irreversible deterioration (discoloration) of the pool lining.
Therefore, if the manufacturer's responsibility was engaged for a malfunction of the control or regulation device, it would
be limited to the repair or the replacement of the product free of charge. Then, it is strongly recommended to check the
levels of chlorine and pH each week with your usual analysis kit.
PH INSTRUCTION PH INSTRUCTION
OK OK
◄► ◄►
PH CORRECTIVE TYPE PH CORRECTIVE TYPE
ACID/BASE ACID/BASE
OK OK
◄► ◄► ▼▲ ▼▲
Your device is now ready.
7.0 7.0
▼▲ ▼▲
39