Turn On And Turn Off Delay (T-On And T-Off) - CARLO GAVAZZI IO-Link CA18EA Manuel D'instructions

Presence of
Presence of target
target
N.O.
2.4.4.1.3. Turn Off delay (T-off)
The deactivation of the switching output is delayed until after to the time of removal of the target
in the front of the sensor, as like shown in the figure below.
Presence of
Presence of target
target
N.O.

2.4.4.1.4. Turn ON and Turn Off delay (T-on and T-off)

When selected, both the T-on and the Toff delays are applied to the generation of the switching
output.
Presence of target
N.O.
14
Rev.00 - 02.2020 | CA18EA/CA30EA Capacitve sensors with IO-Link interface | © 2020 | CARLO GAVAZZI Industri
Ton Ton
Toff Toff
Ton Ton
Ton
Example with normally open output
Toff Toff
Example with normally open output
Ton Toff
Toff
Example with normally open output