System Requirements; Installation Instructions - USRobotics Serial ATA 4-Drive NAS Guide D'installation Rapide

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Back
USB Ports
Ethernet Port
Power Connector
Power Switch

System Requirements

Microsoft Windows Vista, Microsoft Windows XP; Microsoft Windows Server 2003; or Microsoft Win-
dows 2000 Professional, Server, or Advanced Server with Service Pack 4
An HTML 4.01-compliant Web Browser (such as Internet Explorer 5.5 or later or Netscape 8.0 or later)
with JavaScript enabled

Installation Instructions

If you bought your Serial ATA 4-Drive NAS with the disks already installed and configured, and you do not
want to change your disk configuration, skip step one and proceed with Attaching USB Devices in step
two on page 9.
Step One: Determine Your Configuration
Before you start the physical installation of your storage system, decide which configuration is best
suited to your needs. The configuration that you choose may affect the order in which you load the disks
into your storage system, and you will need to specify your configuration choice when you reach "Step
Five: Configure your Storage System".
Each supported configuration has a different balance of desirable characteristics, as shown in the table
below. The configurations available to you depend on the number of disks installed in your storage sys-
tem. Use this table to select your configuration based on the number of disks you intend to use and the
characteristics that are of the highest priority to you.
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8700

Table des Matières