LOTRONIC AFX light IBOX-H5 Manuel D'utilisation page 6

3. Up: Scroll "UP" through the menu list to increase the value of the current function
4. Down: Scroll "DOWN" through the menu list to decrease the value of current function
5. IR Infrared control sensor
6. Wireless DMX indicator
OLED Display Back Light
The OLED display can be set to turn off in 10-30 second or always "On". Follow the steps below:
• Continue pressing "Menu" till "Screen saving" appears.
• Press "Enter". "IOS" is displayed. Scroll up/down to set up after how many seconds the OLED
display turns off, or stays always "On"
• Press "Enter" to save your setting.
Fixture Temperature
The fixture has a temperature protection function. You can easily check the fixture temperature via
the OLED display information menu. When the fixture temperature is higher than 55 degrees, the
light output will decrease to 80%. When the fixture temperature is higher than 65 degrees, the light
output will decrease to 60%. When the fixture temperature is higher than 75 degrees, the leds will
go off automatically until the temperature comes down to 55 degrees.
ECO Mode
ECO mode allows the fixture to run longer from a single charge when used in a 3 or more color pro-
gram with a slight reduction in intensity.
To set the fixture into eco mode, press the "MENU" button and use the "UP" and "DOWN" buttons
to show ECO on the OLED display. Now press the "ENTER" button and use the "UP" and "DOWN"
buttons to choose between on or off. Press the "ENTER" button to save the setting.
MENU MAP
Main Menu Sub-Menu UP/DOWN
001 Address 001-512
6CH
Channel 8CH
12CH
Hold
DMX fail Blackout
Auto
600Hz
1200Hz
Frequency 2000Hz
4000Hz
25kHz
Red
Green
Blue
Manual color
White
Amber
UV
EN 6
000-255
000-255
000-255
000-255
000-255
000-255
Remarks
DMX address setting
DMX channel setting
DMX fail mode setting
LED refresh rate setting
Customized color
© Copyright LOTRONIC 2020