Intended Use - Tyco Electronics 0-0523199-2 Manuel D'utilisation

6-744011-7
4

Intended use

The hydraulic foot pumps RÉF. 523199-2 and 523199-3 are used to actuate hydraulic tools. Crimping
heads such as shown below for example may be operated with maximum pressure of 700bars:
RÉF. 1490745-1
IS 408-10111
(max. 700bar)
The hydraulic hose to be used has the RÉF. 59909-7.
Note:
The tools are to be used only and exclusively for the purpose described!
RÉF. 1490746-1 RÉF. 1490747-1
IS 408-10112 IS 408-8715
(max. 700bar) (max. 700bar)
RÉF. 58422-1
(max. 700bar)
Page 19 / 26
RÉF. 1976230-1
IS 408-10145
(max. 700bar)
RÉF. 69067
(max. 700bar)
ECOC: EGC0 ; LOC: AI
412-18745 Rev.B
RÉF. 1673672-1
IS 408-8910
(max.700bar)