Table des Matières
Publicité
The undersigned, representing the following supplier and the authorised representative established within the
Community
Baldor Electric Company
5711 R. S. Boreham, Jr. Street
Fort Smith, Arkansas 72901
USA
herewith declare that the Products
Product identification (brand and
catalogue number/part number):
are in conformity with the provisions of the following EC Directive(s) when installed in accordance with the installation
instructions contained in the product documentation:
94/9/EC
and that the standards and/or technical specifications referenced below have been applied:
EN 1127-1:1998
EN 13463-1:2001
EN13463-5:2003
Supplier:
Signature
Name:
Position:
Date:
Document Control Number: DOC-BEZ-DG-M11-A-EN.DOC
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Tél. : (1) 479.646.4711, Fax (1) 479.648.5792, Fax international (1) 479.648.5895
6040 Ponders Court, Greenville, SC 29615-4617 États-Unis, Tél. : (1) 864-297-4800, Télécopieur : (1) 864-281-2433
© Baldor Electric Company
IMN1601FR (Remplace 499314)
EC Declaration of Conformity
Gear Reducers
Dodge Torque Arm II, Sizes TA0107 through TA12608,
Equipment Group I, Category M2 c/Equipment Group II Category
2 GD c T4 TAMB - 30°C to +50°C
ATEX
Explosive Atmospheres - Explosion Prevention And Protection - Part 1: Basic
Concepts And Methodology
Non - Electrical Equipment For Potentially Explosive Atmospheres -Method And
Requirements
Non-Electrical Equipment Intended For Use In Potentially Explosive
Atmospheres - Part 5: Protection By Constructional Safety "C"
L. Evans Massey
Manager Standards and Certification
20-July-09
Assistance produit Dodge (Dodge Product Support)
Baldor Electric Germany GmbH
Dieselstrasse 22a
85551 Kirchheim
Germany
Authorised Representative in the Community:
Signature
Name:
Michael Klein
Position:
Product Group Director Europe
Date:
20-July-09
Siège mondial
www.baldor.com
1 / 1
Tous droits réservés. Imprimé aux États-Unis.
3/11
Publicité
Table des Matières
