IWC Schaffhausen AQUATIMER DEEP THREE Mode D'emploi page 36

— 3 6 —
c l e A n i n g t h e W A t c h A F t e r D i v i n g
After diving – and especially after diving in seawater – you should rinse your watch
under running tap water. This will prevent salt incrustation on the case, bracelet or
strap and clasp or buckle. You should also clean the wet area of the SafeDive system
by rinsing water through the holes on the protective bow on the right­hand side of the
case. Also ensure that you clean the pressure converter on the left­hand side of the
case thoroughly.
n O t e
If your watch has a strap made of leather, textile or rubber with a leather or textile
inlay, make sure that the high­quality strap does not come into contact with water,
oily substances, solvents, cleaning agents or cosmetic products. This way you can
prevent discoloration and premature ageing of the material.
s e r v i c i n g y O u r A q u A t i m e r D e e p t h r e e
Although the parts in this watch are all manufactured from top­quality materials, a
number of components are subject to natural wear and tear. It is particularly important
to ensure that the points at which wear occurs are always well lubricated and that oil
contaminated by metal abrasion is regularly removed. For this reason, we recommend
that you have your watch serviced approximately every 5 years. Please contact an
authorized IWC Official Agent or send your watch directly to the IWC Customer Ser­
vice Department in Schaffhausen.
A q u A t i m e r D e e p t h r e e