Meteo Control BLUE'LOG XM Guide De Démarrage Rapide page 8

Masquer les pouces Voir aussi pour BLUE'LOG XM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7
CONNECTION TO VCOM – REGISTRATION
In order to establish a connection to VCOM, you first need to set up a system in VCOM.
After that, you can register in two ways:
EN
Via the blue'Log web interface
1.
2.
Via VCOM
blue'Log web interface
In the "PV System – VCOM" menu, you need to give a system key (e.g. WTTRY), a
VCOM user name and a password and then click on "Registration".
You can set the transfer interval to the desired frequency. The time indicates how often
the data in VCOM will be updated.
VCOM
Open the "Register Data Logger" tab in the "System Configuration –
X series – Administration" menu.
Add the blue'Log, giving the blue'Log hardware number (HW No.), the blue'Log user
name and the password.
Note regarding data protection (GDPR)
At this point, we would like to inform you what data we collect when you configure and use the blue'Log.
User name, password, e-mail address => These data are only stored locally on the
logger's SD card
E-mail addresses => The e-mail addresses entered in the user administration and the
alarm configuration can be viewed by any user and are transferred to VCOM for
information purposes.
blue'Log

Publicité

Table des Matières
loading

Produits Connexes pour Meteo Control BLUE'LOG XM

Ce manuel est également adapté pour:

Blue'log xc

Table des Matières