Factory Reset - Meteo Control BLUE'LOG XM Guide De Démarrage Rapide

5
Display
EN

FACTORY RESET

By pressing the ESC button for 5s you can reset the blue'Log to its factory settings.
After the 5s a security check appears in the display which has to be confirmed with OK.
After the reset the blue'Log will be restarted.
BLUE'LOG CONFIGURATION – WEB INTERFACE
Browser registration
To connect to your blue'Log, enter the blue'Log IP address in the address bar of your
Internet browser.
As an alternative, you may enter the blue'Log's host name*.
Router – network support:
•
DNS, Netbios:
•
No DNS, Netbios:
*The host name can be changed via the web interface in the "System – Ethernet" menu.
Setting up user access
You need to set up user access when logging on for the first time. Please give a user
name, password, display PIN and e-mail address.
User data can be changed and other users set up via the web interface in the "System –
Users" menu.
http://blue-xnnnnnnnn
http://blue-xnnnnnnnn.local
n = last eight digits of the hardware number