Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
STATUS-LEDS
The meaning of the LEDs on the front of the blue'Log:
Symbol
LED
BLUE'LOG CONFIGURATION – NETWORK
The blue'Log is configured via your web browser (e.g. Chrome, Firefox). In order to
configure it, you must first configure the network and set up user access.
Network configuration
The Ethernet connection of the blue'Log must be connected to a LAN network (e.g. LAN
interface PC, router, switch)
The current IP address of the blue'Log is shown on the display's start screen.
Network:
•
With DHCP server:
•
Without DHCP server:
To adjust your network parameters (DHCP or static), navigate to the network settings by
using the directional pad and the buttons.
Meaning
blue'Log is supplied with power
Green:
Off:
No power supply
Green:
System loaded successfully, normal operation
Orange:
System booting, boot phase
Red:
System error
Green:
Connected to VCOM
Orange:
Establishing connection to VCOM
Red:
No connection to VCOM
IP address assigned by DHCP server
IP address generated randomly by the
blue'Log (range: 169.254.XXX.XXX)
EN
Publicité
Table des Matières
