Charging The Battery - Amplicomms BTH 1410-NL Mode D'emploi

G
ETTING STARTED
Getting started
Box contents
• 1 Receiver with induction neck-loop
• 1 AC adapter with Micro USB for charging the receiver
• 1 User guide
Important: please make sure you've read the safety information on page
24 before you set up your device.

Charging the battery

Charge the battery for about 2 hours before first use. Switch off the receiver
(position OFF).
1 Attach the micro USB plug (power adapter) to the charging jack on the
receiver.
2 Attach the power supply to a wall outlet.
• A fully charged battery provides up to 5 hours of listening enjoy-
ment.
• To conserve battery power, the receiver automatically shuts off if no
signal is detected for a period of approx. 5 minutes or when the level
is too low.
16
Helpline UK 0844 800 6503
(See page 25 for costs and hours of operation)