Connecting The Transmitter - Amplicomms TV 2510NL Mode D'emploi

G
ETTING STARTED
Getting started
Box contents
• 1 Receiver with induction neck-loop
• 1 Transmitter base
• 1 AC adapter for the transmitter
• 2 Rechargeable batteries for the receiver (Lithium Polymer)
• 1 Audio cable (both ends with 3.5 mm stereo plug)
• 1 Adapter cable (RCA)
• 1 SCART Adapter for TV
• 1 Adapter plug 6.3 mm to 3.5 mm
• 1 External microphone with adapter plug and holder
• 1 User guide
Important: please make sure you've read the safety information on page
30 before you set up your device.

Connecting the transmitter

1 Connect the power adapter to the DC IN input socket located on the
transmitter rear panel.
2 Connect the power adapter provided to an electrical outlet.
3 Connect the transmitter to your audio source.
RCA adapter cable, audio cable, 6.3 mm to 3.5 mm adapter plug, external
microphone and a SCART adapter for TV are provided for various type of
connection to your audio source (e.g. TV set, Hi-Fi system, MP3 or iPod).
Please note that only one input (either audio input or optical input)
must be connected.
The green power indicator LED will blink as soon as you have connected the
power adapter to the electrical outlet and when the audio signal is detected
from the audio source, the green LED indicator will glow constantly.
20
Helpline UK 0844 800 6503
(See page 32 for costs and hours of operation)