Bluetooth Pairing - Amplicomms BTH 1410-NL Mode D'emploi

Bluetooth pairing

1 Switch on the receiver.
2 Press and hold down the MIC button for approx. 5 seconds. The indicator
LED will flash green and blue.
3 Now run on the transmitter (e.g. on your mobile phone) the necessary
steps. If necessary, refer to the relevant user manual for help. The Blue-
tooth name of the receiver is "amplicomms".
4 If the devices are paired successfully, the indicator LED lights blue con-
stantly.
NFC pairing
If your sending device (e.g. your mobile phone/smartphone) supports NFC
(Near Field Communication), attach the receivers area marked with the NFC-
Logo ( ), as near as possible to the relevant area on the sender for a few
seconds. It will then activate the Bluetooth function and pair with each other
automatically.
(See page 25 for costs and hours of operation)
Helpline UK 0844 800 6503
G
ETTING STARTED
17