Novag Perfect Chess 2Robot Mode D'emploi page 17

Table des Matières

Les langues disponibles

Example: If the chess piece is at the upper left corner of the square A8 (as depicted below), press the

square B7 on the chessboard with another chess piece until you hear a beep. The computer will now

know that the chess piece is standing in the upper left corner of square A8 and will automatically

adjust its calibration to move the chess piece more towards the centre in the next move (if the chess

piece is in the top right corner, press square H7 and so on). Press the GO key to double-check the

position. Repeat if necessary. Once you are satisfied that the chess piece is centred, proceed with the

calibration of square H1 (long reach of arm).

CALIBRATION OF SQUARE H1 (long reach of arm):

Place a chess piece on square H1.

Press the SOUND key and the display will toggle to P2:xx.yy_ (the display represents the

current numerical value for the calibration in position P2).

Press GO and wait for the computer to complete its move.

Check the position of the chess piece once the move is completed.

Check the position of the chess piece once the move is completed and compare it to the

schematic below. The squares A8 to G2 on your chess computer shall represent square H1.

Proceed as described in the example (same procedure as calibration of square A8).

Example: If the chess piece is at the upper right corner of the square H1 (as depicted above), press the

square G8 on the chessboard with another chess piece until you hear a beep. The computer will now

know that the chess piece is standing in the upper right corner of square H1 and will automatically

adjust its calibration to move the chess piece more towards the centre in the next move (if the chess

piece is standing on the lower left corner of square H1, press the actual chessboard square A2, and so

on). Press the GO key to double-check the position. Repeat if necessary. When you are satisfied the

chess piece is centred, please verify the calibration:

Table des Matières

Chapitres

Table des Matières