Since the packaging elements (plastic bags, staples, etc.) are a
including packaging, is 10kg.
1. Open the outer box.
2.
the ground.
3. Take out the vacuum head carton.
5.
1.
MACHINE SAFETY
2.
3. Insert the appliance into the protective bag, taking care not to
damage either during this operation.
Insert the appliance into the carton, taking care not to damage
either during this operation.
5. Insert the accessories support and the head block inside the
1. Vacuum nozzle.
2.
3.
5.
6.
7.
8.
1.
disable it by pushing it
2.
it
.
3.
SYMBOLS USED ON THE APPLIANCE
PREPARATION OF THE APPLIANCE
HANDLING THE PACKED APPLIANCE
:
HOW TO UNPACK THE APPLIANCE
,
HOW TO TRANSPORT THE APPLIANCE
").
.
COMPONENT POSITIONING
:
APPLIANCE SAFETY
.
A: 430 mm
B: 390 mm
C: 410 mm
handle, taking care not to damage either.
ATTENTION: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
carton.
6. Place the accessories in the carton.
7. Close the carton.
ATTENTION: When transporting the appliance on vehicles,
secure it according to the directives in force so that it cannot
slide or tip over.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
9.
10. Filter - collection bag.
11. Collection tank.
12. Collection tank lid.
13.
15.
16.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
ATTENTION: To prevent damaging the power cable,
disconnect the plug from the mains socket by directly pulling
the plug and not the cable.
25