How to carry out a move/transfer, continued
5. Fold down the two half-seats.
NOTE: The care recipient should be seated during movement.
2.
To carry out a transfer to a chair/wheelchair/bed/toilet, you carry out the above steps in reverse order.
3.
When moving to a toilet:
•
When the care recipient is in position, the rear castor brakes are applied and the care recipient stands up.
•
Remove the care recipient's clothing if necessary then fold up the half-seats so the care recipient can sit on
the toilet him or herself. The product can now act as a support frame to make it easier for the care recipient
during the toilet visit.
Individual adjustments
12. Cleaning
The product must be regularly cleaned/disinfected – after every use if necessary or at least once a day.
Clean the product by wiping with a damp cloth moistened with warm water and disinfectant detergent. Dry
thoroughly to effectively disinfect all surfaces. Do not use chlorine, phenols, pentanols or other strong detergents
that could damage the surface/dry out the cushions or cause premature cracking.
System
I F U
3.
Lock the
brakes.
4.
6. Ask the care recipient to sit down.
Release the brakes and move the care recipient.
It's possible to adjust the height of the shin
support and the half-seats (25 mm)
1. Untie the screws and adjust the shin sup-
port/seats to the wanted height.
2. Tie the screws and use the Mover Aqua as
above.
Place the Mover so the care
recipient can easily place his or
her feet on the step and his or
her knees/ shins against the shin
support. Let the care recipient
take hold of the crossbars/
handles however he or she
wishes.
7