Bosch GAS 50 M Professional Notice Originale page 16

OBJ_BUCH-877-003.book Page 16 Monday, March 1, 2010 12:48 PM
16 | English
Before restarting, check the proper condi-
tion of the vacuum hose. When doing this,
leave the vacuum hose mounted to the vac-
uum cleaner to avoid dust from coming out.
Otherwise, you could possible inhale dust.
Do not use the vacuum cleaner as a seat.
The vacuum cleaner could become damaged.
Use the mains cable and the vacuum hose
carefully. Other persons could be harmed.
Do not clean the vacuum cleaner with a wa-
ter jet pointed directly at it. The penetration
of water into the vacuum cleaner lid increas-
es the risk of an electric shock.
Symbols
The following symbols could have a meaning for the use of your vacuum cleaner. Please take note of
the symbols and their meaning. The correct interpretation of the symbols will help you to use the
vacuum cleaner in a better and safer manner.
Symbol
1 609 929 V18 | (1.3.10)
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Meaning
Read all safety warnings and all
CAUTION
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Fold up the vacuum lid 3 and hold it. Grasp the
folded filter 18 by the fins, pull up and remove.
Vacuum cleaner of dust category M, for vacuum-
ing of dusts that are hazardous to one's health
3
> 0.1 mg/m
Bosch Power Tools