Zeiss Dimension Manuel D'utilisation page 19

Handling
Rear protection cover and lens cap
The rear protection cover as well as the lens cap can be removed
and attached by holding the outer rim of the lid and pulling it
from or pushing it onto the lens.
Mounting and removing the lens
The lens is fitted with a C mount (6). Mount the lens into the
camera mount and turn it clockwise until you feel it engage with
resistance. To remove it, turn the lens anticlockwise.
Mounting and removing filters and lens shades
Standard threaded filters can be attached to the front
of the lens (1). lf you use more than one filter at a time,
vignetting (shading of the image corners) can occur. We
recommend the use of T*
with a screw thread can be attached to the front of the
lens (1) as well.
filters from ZEISS. Lens shades
®
US
21