Partial Demineralisation Cartridges With Flow Meter; Full Demineralisation Cartridges With Conductivity Meter - Miele professional PG 8595 Mode D'emploi

Partial deminerali‐
sation cartridges
with flow meter
Full demineralisa‐
tion cartridges
with conductivity
meter
Guide to the appliance
The PG Aqua Purificator is a water processing system and can be op‐
erated with two different water demineralisation cartridges.
With partial demineralisation, carbonate hardness is reduced by bind‐
ing calcium and magnesium ions, thereby reducing the mineral con‐
tent of the water.
The flow meter indicates when the cartridge requires changing.
– TE P 2000 partial demineralisation cartridge
Filled with 12.5 l resin.
– TE P 2800 partial demineralisation cartridge
Filled with 19 l resin.
Full demineralisation removes all salts and minerals from water.
The conductivity meter shows the conductivity level of the demineral‐
ised water in µS/cm (microsiemens per centimetre) to enable quality
control of the demineralised water.
– VE P 2000 full demineralisation cartridge
Filled with 12.5 l resin.
– VE P 2800 full demineralisation cartridge
Filled with 19 l resin.
The cartridges are filled with renewable resin which can be regener‐
ated after depletion. The whole cartridge can be sent to a regenera‐
tion station for reprocessing.
The PG 8595 Aqua Purificator has to be commissioned before first
use and operators trained in its use by a Miele technician or author‐
ised person only.
Please follow the operating instructions for the water demineralisa‐
tion cartridges, conductivity meter, flow meter and the washer-dis‐
infector.
en - Guide to the appliance
33