Specific Safety Rules; Functional Description - Milwaukee V28 0724-20 Manuel De L'utilisateur

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates. These carry important information. If unreadable or
missing, contact a MILWAUKEE service facility for a free replacement.
2. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to fi lter out microscopic particles.
3. Hold tools by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
4. Keep hands away from all cutting edges and moving parts.
5. Wear ear protectors with impact drill. Exposure to noise can cause hearing loss.
6. Use auxiliary handles supplied with the tool. Loss of control can cause personal
injury.
4
Symbology
Volts Direct Current
No Load Revolutions
per Minute (RPM)
Underwriters Laboratories, Inc.,
United States and Canada
Specifi cations
No Load
Volts No Load Blows per
Cat. No. DC RPM Minute
0724-20 28 Low 0-600 Low 0-9000
High 0-1800 High 0-27000

FUNCTIONAL DESCRIPTION

10
9
8
1. Speed selector
2. Tool holder
3. Control switch
5
4. Battery pack
5. Battery latch
6. Trigger
7. Torque selector collar
8. Hammer/drill selector collar
9. Keyless chuck
10. Side handle
Capacities
Wood
Flat Auger Hole Screws
Bit Bit Saw (dia.) Steel Masonry
1-1/2" 1-1/2" 2-9/16" 1/4" 1/2" 1/2"
1
2
3
7
6
4
5