Presetting The Stations Manually; Clearing A Preset Station - Samsung DVD-V70 Mode D'emploi

VCR

Presetting the Stations Manually

GB
Language : English
1
Install
User Set
2
Auto Power Off : Off
Screen Messages : On
3
4
Install
5
Auto Setup
Manual Setup
6
TV System : G
VCR Output CH : CH 36
7
8
9
TV STATION TABLE
10
PR CH NAME DEC
1
11
2
3
4
12
5
SWAPPING : OK
13
DELETE : CLEAR RETURN
MANUAL TUNING
PR :
CH : - - -
14
MFT : -
DECODER : OFF
NAME : - - - -
MEMORY : OK
RETURN
15
16
22
You do not need to preset the stations manually if you
have already set them automatically.
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the
Install
❷
option.
Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
Press the corresponding or buttons, until the Manual
❷
Setup option is selected.
Press the OK or ❿ to select a
Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
Press the or buttons to select a programme number as
❷
required.
Press the ❿ button to preset the station.
Result: The MANUAL TUNING menu is displayed.
Press the ➛ or ❿ buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
Press the button, until the DECODER is selected.
❷
Press the ❿ button to activate or deactivate use of the decoder
for the TV station, if necessary.
Press the or buttons until the NAME is selected.
❷
The station name is set automatically from the broadcast signal.
To change the programme's name, press the ❿ button.
Result: The first letter of the name flashes.
To... Then...
Select a character Press the or button until the
❷
in the name required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
Move to the next or
previous character respectively.
If you... Then...
Wish to store the Press the or buttons until the MFT
❷
station displayed is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station
Do not wish to Press the or buttons until the CH
❷
store the station is selected.
Press the ➛ or ❿ buttons to go on
displayed
scanning the frequency band and display
the next station
Go back to the beginning of Step 14
Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
On completion, press the RETURN button three times to exit the
menu.

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding , buttons to select the Install
❷
option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4
Press the corresponding or buttons, until the
❷
Setup option is selected.
5 Press the OK or ❿ to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the required preset
❷
TV station (PR) is selected.
7
Press the CLEAR button.
8 6
Repeat the same procedure from Step onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button four times to exit the
menu.
VCR
GB
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
TV System : G
Manual
VCR Output CH : CH 36
TV STATION TABLE
PR CH NAME DEC
1 21
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
23