VWR VisiScope 200 Série Manuel D'utilisation page 2

BL224T1 / BL254T1 - How to place the Tablet PC
2) Then hook the Tablet PC onto the 4 screws of the junction:
Your Tablet's been set with the Rotation function disabled: this
prevents any flipping of the Live View in order to get a con-
tinuous and as large as possible view of your slide also when
the Tablet is removed from the holder. To enable this function
again is very easy: you can activate the Rotation by swiping
the screen on his bottom right side and selecting Settings +
Screen. Anyway, it's not suggested to activate the function
when the camera is in Live View mode as it may give troubles
when the camera runs at high resolutions.
The Tablet PC can be fixed to a junction that can be freely
rotated around its axis:
1) Fix the rotating part of the junction using the black wing-nut:
3) You can now adjust the orientation by loosening the wing-nut.
4) The Tablet PC can be removed from the junction pulling it up-
ward, in order to unhook it from the fixing screws.
2