Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction
Dear customer!
Thank you for buying one of our products.
You can fi nd all the information you need in these operating instructions.
Please read the instructions completely with care and observe the advice given.
The operating instructions are part of the Pneumatic hydraulic jack and should be kept intact.
The manufacturer is not liable for personal injuries and material damages which result from improper use.
!
THIS MANUAL CONTAINS IMPORTANT SAFETY ADVICE
1. Technical specifications
Max. load:
Weight:
Wheel diameter:
Max. height:
Min. height without adapter:
Width:
Length:
Length of handle:
Diameter of saddle hole:
2. Safety and general instructions
!
WARNING
It is up to the user to check all the safety instructions, operating modes and maintenance instructions in this user
manual and on the labels, before using the product. The owner or user of the jack must keep the instructions
safely for future use.
This jack is solely a lifting tool. Before any repairs or operations, use safety blocks to support the load.
For safety reasons, do not exceed the maximum load during lifting.
The jack is designed for use only on a flat, strong, sound horizontal base.
If the jack is used on an unsuitable base, it may become unstable and the load may fall off.
Immediately after lifting, support the load on axle stands.
Only lift the vehicle from places specified by the constructor.
Always be careful to centre the load on the lifting head to avoid any risk of the load tipping.
Check the position of light loads to ensure that the jack is not destabilised.
Jacks are not intended to be used to support heavy loads for long periods.
No modifications must be made to the jack.
Read, study and understand the user manual delivered with the jack, before use.
If these warnings are not heeded, loss of load, damage to the jack and /or malfunctioning result may occur,
resulting in a loss of capacity or serious injuries.
KEEP THIS MANUAL FOR FUTURE CONSULTATION
35 tonnes
47 kg
220 mm
525 mm
250 mm
185 mm
595 mm
1130 mm
25 mm
Publicité
Table des Matières
