Table des Matières
Publicité
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
Read and follow all safety instructions.
2.
Do not use seasonal products outdoors unless marked suitable for indoor
and outdoor use. When products are used in outdoor applications, connect
the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installation.
3.
This seasonal use product is not intended for permanent installation or use.
4.
Do not mount or place near gas or electric heaters, fireplaces, candles, or
other similar sources of heat.
5.
Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
6.
Do not let lamps rest on the supply cord or on any wire.
7.
This is an electric product - not a toy! To avoid risk of fire, burns, personal
injury and electric shock it should not be played with or placed where small
children can reach it.
8.
Do not use this product for other than its intended use.
9.
Do not hang ornaments or other objects from cord, wire, or light string.
10.
Do not cover the product with cloth, paper, or any material not part of the
product when in use.
11.
Do not close doors or windows on the product or extension cords as this may
damage the wire insulation.
12.
Read and follow all instructions that are on the product or provided with the
product.
13.
Save these instructions.
USE AND CARE INSTRUCTIONS
a.
When the product is placed on a live tree, the tree should be well maintained
and fresh. Do not place on live trees in which the needles are brown or break
off easily. Keep the live tree holder filled with water.
b.
Once the product is placed, the installation should be well secured and
stable.
c.
Before using or reusing, inspect the product carefully. Discard any products
that have cut damaged, or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.
d.
When storing the product, carefully remove the product from wherever it
is placed, including trees, branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and wires.
e.
When not in use, store neatly in a cool, dry location protected from sunlight.
ATTENTION – TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK
a.
Do not install on surfaces having sharp edges, or coverings of metal or
materials which look like metal.
b.
Do not mount or support wires in a manner that can cut or damage wire
insulation.
Class A Disclaimer: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
i.
Reorient or relocate the receiving antenna.
ii.
Increase the separation between the equipment and receiver.
iii.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
iv.
Consult the dealer or an experienced radio/television technician for help.
WARNING!
Do not connect the light string to the power supply while it is in the packaging.
The connecting cable cannot be repaired or replaced. THE LAMPS ARE NOT
REPLACEABLE. The lighting chain must not be used without all gaskets being in
place. Lighting chains not intended for interconnection. Do not connect this light
string electrically to devices from another manufacturer. CAUTION! Strangulation
hazard. Keep out of reach of young children.
3
The crossed-out wheeled bin symbol indicates that the item should be disposed
of separately from household waste. The item should be handed in for recycling in
accordance with local environmental regulations for waste disposal.
The manufacturer, Ledworks Srl, declares that this device complies with the (LVD)
2014/35/EU, (EMC) 2014/30/EU, (RoHS) 2011/65/EU directives. The full text of the
EU declaration of conformity is available at the following Internet address: www.
twinkly.com/certifications
TECHNICAL SPECIFICATIONS
No. of ports
1 (*)
IP rating
IP65
Connectivity
Wi-Fi | Bluetooth
Power rating
48 W MAX
Adapter input voltage
120 - 240 VAC | MAX 50/60Hz
Temperature range
-15°C / 40°C | 5°F / 104°F
Storage temperature range
-20°C / 60°C | -4°F / 140°F
Certification
US | EU | JP | AU certified
Warranty
24 months
(*) extendible to 2 with Twinkly PLUS Port Splitter
®
Publicité
Table des Matières
