Battery Installation - Nikko RDC-160022 Manuel Du Propriétaire

English
PREPARATION FOR STARTING OPERATION
1. HOW TO ATTACH ANTENNA TUBE
Antenna tube
Antenna tube holder
2. HOW TO INSTALL TRANSMITTER ANTENNA
Place the transmitter antenna into the
antenna holder to screw it in clock-
wise.
1

BATTERY INSTALLATION

TRANSMITTER
9V(006P)
4
Antenna wire
CAUTION WHEN USING BATTERIES
Install battery pack making sure that the + and -
poles of the battery is positioned accurately.
Make sure vehicle's on-off switch is turned OFF
when installing battery pack.
Remove all the batteries from the vehicle and the
transmitter after playing.
Pass the antenna wire through the
antenna tube, then insert the tube
into the antenna tube holder.
If the antenna tube cannot be suc-
cessfully inserted into the antenna
tube holder, try holding the root of
the antenna wire with fingers of one
hand and extending the wire with
fingers of the other hand.
* Note: Be careful not to pull an-
tenna wire too strong.
Don't install the antenna extended. It's
dangerous.
If the antenna is not screwed in se-
curely, the vehicle may move errati-
cally. Screw the antenna securely.