Christopeit Sport EM 6 Notice De Montage Et D'utilisation page 17

Step 4:
Attach the handlebar (6) at handlebar support (60).
1. Guide the preassembled handlebar unit (6) through the upper part of the
handlebar post (60) and close the bracket of handlebar holder.
2. Screw the handlebar (6) in desired position at the handlebar post (60) with
washer (8) and handlebar screw (9).
Step 5:
Attach the saddle (10) at saddle slide (12).
1. Push the saddle (10) with saddle bracket into the saddle slide (12) and
tight it up in desired position.
2. Place the saddle slide (12) into the holder of saddle post (16), set it at
the desired position and screw it onto the saddle support (16) by screw (11)
washer (14) and star grip nut (15).
Step 6:
Attach the saddle support (16) at main frame (28).
1. Push the saddle support wrapping (17) over the saddle support tube (18).
Place the saddle support (16) into the matching locator in the main frame
(28), set it at the desired position and lock it by inserting the bolt with the
quick release (59) in place and doing it up tight.
(The setting of the saddle support can be adjusted easily as desired later
through turning and pulling the quick release (59).) Furthermore, you must
ensure when setting this desired position that the seat pillar is not pulled
out of the main frame further than the highest setting position, which is
marked.
17