Bpt OH/Z.02 Mode D'emploi page 25

Installation of the module
in the HOASIS system
Go to the chapter INSTALLA-
TION OF THE THERMAL CON-
TROL ZONES, follow the OH/T
terminal instructions and then
press the button on the OH/Z
zone module to assign the rela-
tive zone number. Repeat the
operation for all zone modules.
The number 0 is displayed, fol-
lowed a few seconds later by the
assigned zone number.
Installation of the module
in the NEHOS system
Follow the instructions for the
installation of a zone module of
the NEHOS system.
Replacement of the module in
the HOASIS system
After replacing the unit, in the
7
6
5
4
3
2
1
3-MODULES
EMBEDDING
BOX
BODY BPT
FRONT PLATE
BTICINO
(Art. L4803)
(Art. N4803)
VIMAR
Plana
(Art. 14653)
Fig. 5
GB
25