Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
CAUTION:
•
Always remove the fuel cell, the battery car-
tridge and nails before attempting to perform
inspection or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or the like.
Discoloration, deformation or cracks may result.
Maintenance after daily work
At the end of daily work, conduct an end-of-workday routine.
These simple steps are based on maintaining the safety
and performance of the tool.
Before leaving the work site:
•
Remove the battery cartridge and store in a
tool-carrying case. Always use the tool-carrying
case for transporting and storing the tool.
•
Dispose of all empty cells where they will not be
found by children, crushed, punctured or burned.
When you get home:
•
Place the battery cartridge in its charger if it needs
charging as indicated by the red indication lamp.
•
Wipe the tool with a clean, soft cloth.
•
Check the filter and clean if it is dusty.
Cleaning the air filter
► 1. Filter cover 2. Filter
Press slightly up the filter cover and remove it. And then
simply lift out the filter.
Tap the filter lightly to remove any dust. Soap and water
restores the filter to an almost new condition
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Thoroughly cleaning
If dry fires occur frequently, which means the tool is
needed to be cleansed thoroughly.
See the accompanying cleaning guide for detail, and
perform the cleaning.
If you have any questions regarding to cleaning, please
ask your local Makita Service Center.
OPTIONAL
ACCESSORIES
•
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
•
•
•
•
NOTE:
•
MAKITA LIMITED ONE YEAR
WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested
before leaving the factory. It is warranted to be free of
defects from workmanship and materials for the period
1
of ONE YEAR from the date of original purchase.
Should any trouble develop during this one year period,
2
return the COMPLETE tool, freight prepaid, to one
of Makita's Factory or Authorized Service Centers. If
inspection shows the trouble is caused by defective
workmanship or material, Makita will repair (or at our
option, replace) without charge.
This Warranty does not apply where:
•
•
•
•
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY
INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES FROM THE SALE OR USE OF THE
PRODUCT. THIS DISCLAIMER APPLIES BOTH
DURING AND AFTER THE TERM OF THIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED
WARRANTIES, INCLUDING IMPLIED WARRANTIES
OF "MERCHANTABILITY" AND "FITNESS FOR A
SPECIFIC PURPOSE," AFTER THE ONE YEAR TERM
OF THIS WARRANTY.
This Warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state. Some states do not allow the exclusion or lim-
itation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
Some states do not allow limitation on how long an
implied warranty lasts, so the above limitation may not
apply to you.
10 ENGLISH
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
Nails
Safety goggles
Fuel cell
Cleaning kit
Makita genuine battery and charger
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
repairs have been made or attempted by others:
repairs are required because of normal wear and tear:
the tool has been abused, misused or improperly
maintained:
alterations have been made to the tool.
Publicité
Table des Matières
