Tylo Sense Sport-U 5 SSU 5 Notice D'installation Et D'utilisation page 6

4
Removing the Rock Guard
Unscrew the two screws on the side of the heater and lift the rock
guard upwards, see Figure 6, Page 4. (This is necessary when
fi lling the stone compartment or cleaning the fragrance holder and
air humidifi er).
Figure 6: Removing the Rock Guard
Mounting heater
1. Unscrew the fi rst two screws on the back of the heater and
screw one of the four brackets into place. Repeat the proce-
dure until all of the brackets are fi tted see Figure 7, Page 4.
CAUTION! If all the screws on the back are
unscrewed simultaneously, the back plate may
come loose. For this reason, attach the four
brackets to the heater one at a time.
Figure 7: Attaching the brackets to the heater
2. Position the bracket screws according to the specifi ed dimen-
sioning see Figure 8, Page 4.
4
3
2
Figure 8: Dimensioning
1. 10.31 in
2. 7.0 in
3. 17.3 in
4. 8.11 in
3. Attach the herb bowl/air humidifi er (see Figure 9, Page 4).
Figure 9: Fitting the fragrance holder/air humidifi er
4. Hang the heater on the screws see Figure 10, Page 4.
Figure 10: Hang the heater up.
5. Lock the heater into place with the lock screw see Figure 11,
Page 4.
Figure 11: Lock screw for bracket
1