Dometic Frigo Instructions De Montage page 15

Installing condenser
8.1 VW Transporter T5/T6
➤ Insert M6 feed sleeve into the hole available.
➤ Drill where shown in the following picture.
A
CAUTION!
For safety reasons when drilling, note the location of existing wiring harness-
es, wires and other components, in particular those which are not visible The
respective components are to be fitted so as not to create a risk of injury for
vehicle occupants (e.g. due to sharp edges) and not to impair the function of
safety features!
Frigo
15