Notice; Handling And Maintenance - Yamaha HY128-MD Mode D'emploi

Masquer les pouces Voir aussi pour HY128-MD:

Table des Matières

• Be sure to wear a pair of heavy gloves during installation to prevent scratching or

cutting your hands on sharp edges.

• Do not place the product in a location where it may come into contact with corrosive

gases or salt air. Doing so may cause damage to the product(s).

Yamaha cannot be held responsible for damage caused by improper use or

modifications to the product, or data that is lost or destroyed.

NOTICE

To avoid the possibility of malfunction/damage to the product, damage to data, or

damage to other property, follow the notices below.

• Do not expose the product to excessive dust or vibration, or extreme cold or heat

(such as in direct sunlight, near a heater, or in a car during the day), in order to

prevent the possibility of panel disfiguration, unstable operation, or damage to the

internal components.

• Condensation can occur in the product due to rapid, drastic changes in ambient

temperature—when the product is moved from one location to another, or air

conditioning is turned on or off, for example. Using the product while condensation

is present can cause damage. If there is reason to believe that condensation might

have occurred, leave the product for several hours without turning on the power until

the condensation has completely dried out.

• Do not place vinyl, plastic or rubber objects on the product, since this might

discolor the panel.

• When cleaning the product, use a dry and soft cloth. Do not use paint thinners,

solvents, cleaning fluids, or chemical-impregnated wiping cloths.

• Avoid touching exposed connectors and metal parts to minimize the possibility of

bad connections.

• Drain all static electricity from your clothing and body before handling the card.

Static electricity can damage the card. Touch an exposed metal part of the host

device or other grounded object beforehand.

• Do not drop the card or subject it to physical shock as this can result in breakage

and/or malfunction.

HY128-MD Owner's Manual

PACARD_en_3 2/2

Table des Matières