Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16 • English
inspected by a qualified and registered person
after 3 years of use.
• When storing, fold neatly but not tightly
(or roll) without sharp bends in the heating
element and store where no other objects will
be placed upon it.
• Avoid pressing creases into the appliance.
• This appliance is for domestic use only. Not
intended for use in hospitals.
• The detachable controller(s) supplied with
your electric blanket must only be used when
connected to the electric blanket. The controller
should not be used and/or connected to any
other appliance or device.
• This blanket is not to be used by young children
unless the controls have been preset by a
parent or guardian or unless the child has been
adequately instructed on how to operate the
controls safely.
• When storing the appliance, allow it to cool
down before folding; Do not crease the
appliance by placing items on top of it during
storage;
• The supply cord cannot be replaced. If the cord
is damaged the appliance should be scrapped.
• Never immerse the cord and controller in any
liquids.
Compulsory Warning
If the supply cord is damaged, the cord must be
replaced by the manufacturer or its service agent
or similarly qualified person in order to avoid
hazard.
This product has not been designed for any uses
other than those specified in this booklet.
> Use in accordance with purpose
The appliance is only intended for (pre)heating
your bed. Use only as an under blanket and
do not use above the occupant of the bed. No
liability is accepted for any damage resulting
from use for other purposes, faulty operation
or amateur repairs. Guarantee services are also
excluded in such cases.
The appliance is not intended for medical use in
hospitals!
> Instructions for use
Congratulations on the purchase of your CARMEN Blanket. Before first using your new appliance, it is
important that you read all instructions carefully, even if you are familiar with the appliance.
> The products
Naam:
Single Fleece low voltage blanket
Model:
EB1700LV
Afmeting: 91 x 190 cm
Voltage:
220-240V, 50 Hz, 64W
> Part of the appliance
- Blanket
- 3 Heat settings Controller
- Detachable Controller
> Operation instructions
Heat Controller
The CARMEN heat controller with braille markings, allows you to pre-heat the bed and then select the
comfort level you need.
Detachable Controller
For convenience, this model is fitted with a detachable controller so that during the summer months of the
year, you can simply remove the cords and leave the electric blanket on as an underlay.
Washable
All blankets in the range can be spot washed so you can clean up any localised soiling. However, for more
thorough cleaning, there are a range of products that are "fully hands washable" once the heat controls are
removed. This blanket is also machine washable. Please see further for further instructions.
Fitted Design
The fitted blanket features a elastic skirt which holds the electric blanket firmly in position and is designed
to fit varying mattress depths.
Automatic Overheat Protection
Electric Blankets are fitted with our Overheat Safeguard system. This offers protection against overheating
or damage to the element by disengaging the power to the heating element before any overheat hazards
occur.
Electric Blanket Low Voltage (See picture page 2)
Electric Blanket
3 Heat Settings
Controller
3 Heat Settings
Power Cord
Adaptor
Output: 32V DC 2A, 64W
How To Secure Your Electric Blanket
Please follow the instructions below for the type of electric blanket you have purchased. As the blanket you
may have purchased may be a split size, it is quite safe to use for example a Double/Queen blanket on a
double sized bed as long as the heating elements do not extend over the edge of the mattress.
Note: if using a matrass protector, this goes over the electric blanket.
Fitted electric blankets
1. Place blanket on mattress with the mains lead at the pillow end. Ensure the controller emerges from the
top side of the blanket and that the heating elements do not emerge under the pillow area.
2. Gently pull the elastic string until the electric blanket fits snug around the mattress base. Spread out the
skirt to ensure the blanket is flat and evenly tight. (Fig. 1.)
Fig. 1
3. The electric blanket should now be securely fixed to the mattress (Fig. 2.). Smooth out any rucks or folds
in the blanket, then make the bed in your usual manner.
Fig. 2
Controller
Adapter
Publicité
Table des Matières
