How To Use - Carmen Perfect Nail Mode D'emploi

18 • English
sunlight, humidity (never dip it into any liquid) and sharp edges.
Do not use the appliance with wet hands. If the appliance is
humid or wet, unplug it immediately. Do not put it in water.
• When cleaning or putting it away, switch off the appliance and
always pull out the plug from the socket (pull on the plug, not
the cable) if the appliance is not being used and remove the
attached accessories.
• Never leave the appliance unsupervised. To protect children from
the dangers posed by electrical appliances, make sure that the
cable is hanging low and that children do not have access to the
appliance.
• Check the appliance and the cable for damage on a regular
basis. Do not use the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact
an authorized technician. To avoid the exposure to danger,
always have a faulty cable be replaced only by the manufactu-
rer, by our customer service or by a qualified person and with a
cable of the same type.
• Use only original spare parts.
• Pay careful attention to following special safety instruction.
• Only specialists are allowed to do reparations. Improperly
reparations can cause considerable danger!
• There is always risk of injury when using electrical appliances
improperly!
• To prevent unintentional misuse, keep the appliance stored away
in a safe place.
Special safety notes
• This unit is only suitable for filing and polishing fingernails,
toenails, corns and dead skin.
• Do not use this appliance for more than 20 minutes at a time.
If using the appliance again let it cool for 15 minutes.
› › Operating›instructions
Electronic IC Control Advantage
This professional electronic IC control manicure/pedicure set is
super strong. User needs to always start with the lowest speed.
After being familiar with the machine power, then use the step
less infinite speed control switch by press "+" (increasing speed)
or "-" (decreasing speed) to select the best desired speed for
the best performance. Such infinite speed control provides a wide
range of speed to suit your need. It helps to achieve a perfect
performance of this manicure/pedicure set by setting the finest
speed as you like.

How to use

At home:
1) Plug the adaptor into the mains.
2) Insert the plug of the adaptor to the jack of main unit at the end.
3) Choose the desired attachment and push into the front of
the main unit. To remove, firmly pull from the base of the
attachment. Select the desired rotation direction by pressing
the "bi-directional rotation control switch". The "directional
rotation indicator" will light up. Green for clockwise and red for
anti-clockwise.
Remark: This bi-directional rotation feature is for enhance a
perfect and complete manicure/pedicure performance.
4) Select the desired attachment and then plug into the front head
of the machine by gripping the plastic part of the attachment.
5) Start the treatment by selecting the high or low speed by
pushing the "infinite speed control buttons" "+" stand for
increasing speed and "-" stand for decreasing speed.
6) The speed control is infinite and is very strong. It provides a
very wide range of speed selection for your particular detail
manicure/pedicure purpose. Start with low speed until you
are familiar with the machine speed and application. Usually,
low speed is for finger or toe nail. High speed is for thick corn
or dead skin.
19 • English
Remark: This step less control feature is super and convenient
for user to select the best speed to achieve the manicure/
pedicure function.
7) For better performance and results, do not wash your hands or
feet before treatment. Wash after treatment and massage in a
moisturizer to care and soothe your skin.
The Manicure and Pedicure Centre comes with 7 interchangeable
attachments for professional care at home:
A) The fine and rough grain sapphire cone is ideal for removal of
corns. Press gently against the thick corn and dead skin to be
treated. The fine grain sapphire cone is for flat skin area. The
rough grain sapphire cone is for high heel area or any round area.
B) With the thick and thin sharp sapphire point, you can remove
hard skin as well as grind in-grown corners of nails. The
sapphire emery removes only the hard, dead skin, but glides
over the soft skin without harming it. Warning: Do not touch
the surface of the nail.
C) With the fine and rough sapphire shaping disk, the nails can be
shaped in any way you wish. Ten times faster than with a nail
file. The narrow protection-rim prevents injuries, but even so
the corners of the nails are easily accessible. Always start with
low speed first.