Product Description; Prescribed Use - Carmen CEB1501W Mode D'emploi

1. Electric blanket
2. Switch with position button
CAUTION!
The electric underblanket is only intended for heating beds.
Safety
CAUTION!
• The electric underblanket has been provided with a SAFETY SYSTEM. This sensor technology prevents
overheating of the electric underblanket on the entire surface through automatic deactivation in case
of a breakdown. When the SAFETY SYSTEM has switched off the electric underblanket, the temperature
levels in activated condition are no longer lighted.
• Do note that for reasons of safety the electric underblanket can no longer be used after a breakdown and should
be sent to the indicated service address.
• Never connect the faulty electric underblanket to a different switch of the same type. This would also ensure
a final deactivation through the safety system in the switch.
• Evenly spread the electric underblanket over your mattress, starting at the foot end. Fasten the electric blanket with the
elastic bands around the corners of the mattress. Approximately, the cord should be at shoulder height. The electric
underblanket can be used on both sides.
• First connect the switch to the connection point in the blanket by connecting the plug.
• Then insert the plug in the socket.
• Then, as usual, lay the fitted sheet over the bed, so that the electric underblanket is between the
mattress and the fitted sheet. Each time you make the bed, check that the electric underblanket is flat
and properly spread, before you switch it on.
CAUTION!
Make sure the electric underblanket is spread out fully flat and does not fold or crumple during use. We recommend
switching on the electric underblanket about 15 minutes before you go to sleep and covering it with a duvet to
prevent the heat from escaping.

Product description

1

Prescribed use

Operation
Use
16 • EN
2