FS IMC-1F1T Guide De Démarrage Rapide page 10

4. Installing
This section describes the functionalities of the IMC-1F1T's components and
instructs you to installing it. Please read this chapter completely before
continuing.
4.1 Wall-mount Installing
There are wall-mount holes on the left side of the IMC-1F1T that allows to be
easily mounted to the wall. Refer to the following steps for the wall-mount
Installation of the IMC-1F1T:
Step 1: Use the supplied four screws to screw the wall-mount plate on the media
converter.
Step 2: Use four screws (not included in the package) to screw the media
converter onto the wall.
Step 3: Refer to Chapter
IMC-1F1T.
2.3 Wiring the Power Inputs
on power supply to the
- 9 -
EN