Installation; Unit Care - Technics Ottava f SC-C70 Manuel D'utilisation

Masquer les pouces Voir aussi pour Ottava f SC-C70:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

Turn off all the equipment before connection
and read the appropriate operating instructions.
Be sure to raise this unit when moving, and do
not drag this unit.
• Do not carry this unit by holding the subwoofer
of the bottom of this unit.
Notes on the speakers
These speakers do not have magnetic shielding.
Do not place them near TV, PC or other
equipment easily influenced by magnetism.
• Playing music at high volumes for a long period
can cause damage to the system and shorten
the life of the system.
• Decrease the volume in the following
conditions to prevent damage.
- When playing distorted sound
- When adjusting the sound quality
- When turning on/off this unit
For optimum sound effects
The quality and volume of the bass sound, sound
localization performance, sound ambience,
etc. will change depending on the installation
location of this unit, listening position, room
conditions, and other factors. Refer to the
information below when installing this unit.
Determining the installation location
• Place this unit on a flat safe surface.
• To minimize the gap in audio quality between
left and right, install this unit in the way that
acoustic conditions (reflection and absorption
of sound) around this unit can be the same.
Adjusting the distances between this unit
and the wall
• If you install this unit close to a wall or a
corner, the bass sound will be more powerful,
however, if the unit is too close to it, sound
localization performance and sound ambience
may deteriorate. If this occurs, adjust the
distance between this unit and the wall.
Adjusting with the Space Tune function
• You can adjust the sound quality according to
the installation location.

Unit care

• Pull out the AC power supply cord from the
socket before maintenance. Clean this unit
with a soft cloth. To clean the top panel of this
unit, use a soft cloth such as cleaning cloth
(optional), etc. and wipe it horizontally along
its texture.
• When dirt is heavy, wring a wet cloth tightly
to wipe the dirt, and then wipe it with a soft
cloth.
• Do not use solvents including benzine, thinner,
alcohol, kitchen detergent, chemical wiper, etc.
Doing so may cause the exterior case to be
deformed or the coating to come off.
Installation
07
(07)

Publicité

Chapitres

Table des Matières
loading

Table des Matières